|Last up dated 1/1/2016
|The bed is made from Red Oak and is a king size. The four posts
are 2"x 4"s glued together and planned to make 3 1/2" squares by
83" long. Then put on the lathe and turned. The head and foot
boards are made from quarter sawed 1" Red Oak. The head board
has a carved design. Finished with a light oak stain with
polyurethane over the stain.
|This is the head board made from quarter
sawed red oak with a router carved design.
|This is the corner of the bed frame,
the brass rod in the board is what
the bed bolt screws into and the
wood knob on the post covers the
head of the bolt that goes into the
|This cradle is made from Red Oak and
finished with light oak stain with
polyurethane. It is sized to accept a standard
size crib mattress. It can be taken apart for
easy moving and storage.
|This is a queen size bed made from cherry. The head and foot boards
are curly cherry and the four posts are glued up. This bed has a hand
rubbed finish that I mix myself.
|This is a closeup of the cherry head and
|Here is a closeup of the cherry head
board so you can see the spindles better it
has not been finished yet.
|fence post legs the one on the bottom is White
Birch w White Birch legs. The tops vary from
two to three inches thick.
|White Birch Table, top and legs with a hand
rubbed matt finish.
|White Birch table top with a high gloss finish.